 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IPD144N06N G OptiMOS(R) Power-Transistor Features * For fast switching converters and sync. rectification * N-channel enhancement - normal level * 175 C operating temperature * Avalanche rated * Pb-free lead plating, RoHS compliant Product Summary V DS R DS(on),max ID 60 14.4 50 V m A Type IPD144N06N G Package Marking PG-TO252-3 144N06N Maximum ratings, at T j=25 C, unless otherwise specified Parameter Continuous drain current Symbol Conditions ID T C=25 C1) T C=100 C Pulsed drain current Avalanche energy, single pulse Reverse diode dv /dt Gate source voltage Power dissipation Operating and storage temperature IEC climatic category; DIN IEC 68-1 1) 2) Value 50 45 200 240 6 20 Unit A I D,pulse E AS dv /dt V GS P tot T j, T stg T C=25 C2) I D=50 A, R GS=25 I D=50 A, V DS=48 V, di /dt =200 A/s, T j,max=175 C mJ kV/s V W C T C=25 C 136 -55 ... 175 55/175/56 Current is limited by bondwire; with an R thJC=1.1 K/W the chip is able to carry 64 A. See figure 3 Rev.1.21 page 1 2006-03-27 IPD144N06N G Parameter Symbol Conditions min. Thermal characteristics Thermal resistance, junction - case SMD version, device on PCB R thJC R thJA minimal footprint 6 cm2 cooling area3) Electrical characteristics, at T j=25 C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage Zero gate voltage drain current V (BR)DSS V GS=0 V, I D=1 mA V GS(th) I DSS V DS=V GS, I D=80 A V DS=60 V, V GS=0 V, T j=25 C V DS=60 V, V GS=0 V, T j=125 C Gate-source leakage current Drain-source on-state resistance Gate resistance Transconductance I GSS R DS(on) RG g fs |V DS|>2|I D|R DS(on)max, I D=50 A V GS=20 V, V DS=0 V V GS=10 V, I D=50 A 60 2.1 3 0.01 4 1 A V 1.1 75 50 K/W Values typ. max. Unit 26 1 10 11.3 1.5 53 100 100 14.4 nA m S Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 m thick) copper area for drain connection. PCB is vertical in still air. 3) Rev.1.21 page 2 2006-03-27 IPD144N06N G Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics4) Gate to source charge Gate charge at threshold Gate to drain charge Switching charge Gate charge total Gate plateau voltage Output charge Reverse Diode Diode continous forward current Diode pulse current Diode forward voltage Reverse recovery time Reverse recovery charge 4) Values typ. max. Unit C iss C oss C rss t d(on) tr t d(off) tf V DD=30 V, V GS=10 V, I D=50 A, R G=7.2 V GS=0 V, V DS=30 V, f =1 MHz - 1400 400 100 11 35 29 11 1900 530 150 18 53 43 17 pF ns Q gs Q g(th) Q gd Q sw Qg V plateau Q oss V DD=30 V, V GS=0 V V DD=30 V, I D=50 A, V GS=0 to 10 V - 8 4 18 22 41 5.5 14 10 6 27 32 54 19 nC V IS I S,pulse V SD t rr Q rr T C=25 C V GS=0 V, I F=50 A, T j=25 C V R=30 V, I F=I S, di F/dt =100 A/s - 0.94 45 74 50 200 1.3 56 93 A V ns nC See figure 16 for gate charge parameter definition Rev.1.21 page 3 2006-03-27 IPD144N06N G 1 Power dissipation P tot=f(T C); V GS6 V 2 Drain current I D=f(T C); V GS10 V 160 140 60 50 120 40 100 P tot [W] 80 60 I D [A] 0 50 100 150 200 30 20 40 10 20 0 0 0 50 100 150 200 T C [C] T C [C] 3 Safe operating area I D=f(V DS); T C=25 C; D =0 parameter: t p 103 4 Max. transient thermal impedance Z thJC=f(t p) parameter: D =t p/T 101 1 s limited by on-state resistance 10 s 100 s DC 102 100 1 ms 101 10 ms Z thJC [K/W] 0.5 I D [A] 0.2 0.1 10-1 100 0.05 0.02 0.01 single pulse 10-1 10 -1 10-2 10 0 10 1 10 2 10-5 10-4 10-3 10-2 10-1 100 V DS [V] t p [s] Rev.1.21 page 4 2006-03-27 IPD144N06N G 5 Typ. output characteristics I D=f(V DS); T j=25 C parameter: V GS 200 20 V 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 C parameter: V GS 50 180 160 140 120 10 V 5V 40 7V 5.5 V 100 80 60 40 20 0 0 1 2 6.5 V R DS(on) [m] 30 I D [A] 20 6V 6.5 V 7V 10 V 6V 5.5 V 10 20 V 5V 4.5 V 0 4 5 0 10 20 30 40 3 V DS [V] I D [A] 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 80 8 Typ. forward transconductance g fs=f(I D); T j=25 C 70 60 60 50 40 g fs [S] 175 C 25 C I D [A] 40 30 20 20 10 0 0 2 4 6 8 0 0 20 40 60 80 V GS [V] I D [A] Rev.1.21 page 5 2006-03-27 IPD144N06N G 9 Drain-source on-state resistance R DS(on)=f(T j); I D=50 A; V GS=10 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS parameter: I D 40 5 4 30 R DS(on) [m] V GS(th) [V] 3 80 A 800 A 20 98 % 2 typ 10 1 0 -60 -20 20 60 100 140 180 0 -60 -20 20 60 100 140 180 T j [C] T j [C] 11 Typ. capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 10000 103 Ciss 102 175 C 25 C 175C 98% 1000 Coss C [pF] I F [A] 25C 98% 10 1 Crss 100 100 10 0 5 10 15 20 25 30 10-1 0 0.5 1 1.5 2 V DS [V] V SD [V] Rev.1.21 page 6 2006-03-27 IPD144N06N G 13 Avalanche characteristics I AS=f(t AV); R GS=25 parameter: T j(start) 100 14 Typ. gate charge V GS=f(Q gate); I D=50 A pulsed parameter: V DD 12 30 V 25 C 100 C 10 12 V 48 V 8 150 C 10 V GS [V] 1 10 100 1000 I AV [A] 6 4 2 1 0 0 10 20 30 40 50 t AV [s] Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 75 V GS Qg 70 V BR(DSS) [V] 65 60 V g s(th) 55 Q g (th) Q gs -60 -20 20 60 100 140 180 Q sw Q gd Q gate 50 T j [C] Rev.1.21 page 7 2006-03-27 IPD144N06N G PG-TO252-3: Outline packaging: Rev.1.21 page 8 2006-03-27 IPD144N06N G Published by Infineon Technologies AG 81726 Munchen, Germany (c) Infineon Technologies AG 2006. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev.1.21 page 9 2006-03-27 |
Price & Availability of IPD144N06NG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |